jmafonseca
November 9th, 2004, 10:02 AM
Hi Mats, thanks for the ellaborate reply.
I do believe it's a software problem, at least I'm hoping it is because I can't believe Nikon's hardware broke down with not much use and only after 6 months.
1) I've reset the camera in the 2 ways explained on the manual. The 2-button reset which is a "soft" reset and the hard one through the small hidden button underneath the camera. Both failed.
2) I left it without the main battery for a couple of days, no luck. I don't know if the D70 has another hidden battery, I'd be glad to test removing it though if someone does know where.
3) This is the most likely scenario IMHO. There must be a way to reprogram the camera, reset it completely and it'll probably work after this.
Or there could be a keylock function that is keeping me from accessing the camera completely, but this does not seem to be a feature.
Thanks for your reply. If anyone else has any ideas it'll be truly appreciated.
I do believe it's a software problem, at least I'm hoping it is because I can't believe Nikon's hardware broke down with not much use and only after 6 months.
1) I've reset the camera in the 2 ways explained on the manual. The 2-button reset which is a "soft" reset and the hard one through the small hidden button underneath the camera. Both failed.
2) I left it without the main battery for a couple of days, no luck. I don't know if the D70 has another hidden battery, I'd be glad to test removing it though if someone does know where.
3) This is the most likely scenario IMHO. There must be a way to reprogram the camera, reset it completely and it'll probably work after this.
Or there could be a keylock function that is keeping me from accessing the camera completely, but this does not seem to be a feature.
Thanks for your reply. If anyone else has any ideas it'll be truly appreciated.
wallpaper I can#39;t decide which character
gapala
02-26 10:46 AM
Did you talk to a good lawyer yet? Or just hanging out in this forum?
I suggest you talk to a lawyer and get his advise.
As someone suggested, going back to school is always an option for you. By the way, you could have posted this info in the same thread that you opened few days ago on this very same topic.
I suggest you talk to a lawyer and get his advise.
As someone suggested, going back to school is always an option for you. By the way, you could have posted this info in the same thread that you opened few days ago on this very same topic.
.jpg "Up movie image Pixar (2).jpg")
Jerrome
05-21 01:48 PM
Dude you are asking for advise on your own RFE but advising others on their RFEs. I dont get it.
I know answer for his RFE and i don't know answer for my RFE? Is that a problem?
I know answer for his RFE and i don't know answer for my RFE? Is that a problem?
2011 Then there are Pixar#39;s
s416504
12-03 03:02 PM
Does anyone knows if Person eligible for AC21 porting is eligible for unemployment benefit?
more...
tnite
06-26 10:09 AM
what happens if the passport gets stamped and got a new I94 in the vancouver airport and no inspection after coming back to US.
what should we enter as last entry into us
Then put the Vancouver visit as the last entry.
what should we enter as last entry into us
Then put the Vancouver visit as the last entry.
sixburgh
06-28 04:31 PM
You can have AOS and H-1b concurrently. If you have the time, I would renew your H-1B visa at the consulate and re-enter using H-1b. It is much less hassle than to return using AP.
This is what I think too.
But it contradicts a senior member's post above (http://immigrationvoice.org/forum/forum77-work-travel-options-after-485-h1-versus-ead-ap/1598547-should-i-come-back-on-ap-or-h1.html#post1965755).
Any official documentation about this ?
This is what I think too.
But it contradicts a senior member's post above (http://immigrationvoice.org/forum/forum77-work-travel-options-after-485-h1-versus-ead-ap/1598547-should-i-come-back-on-ap-or-h1.html#post1965755).
Any official documentation about this ?
more...
pjalan
04-03 11:35 PM
I just spoke with my company's attorney and she said that I shouldnt get RFE on my I-140. And just in case I get she will inform me and work with the counsel of my ported company to submit a response. Hooray....I am going. My employer is a big known MNC so the only RFE that I may get is exp letter which is very unlikely. With economy going down I dont want to wait for another 6 months for my I-140.
2010 Up movie image Pixar (2).jpg
izolo
06-07 06:26 AM
first sorry for multiple posting, it was by mistake as it was the first time posting. then thanks for the answers. Of course it is a real job with real payment, just remember my application goes back to 3 years ago and and I finally got it with lots of efforts to keep this opportunity. I never thought they might give the visa just for 3 months. now I have to think about all options. Does anybody have any other suggestion?
more...
pd_recapturing
08-14 05:51 PM
Hi, I recently filed my I-485 using my pre-approved Eb3 I-140 (PD:May 2004). Around a month back, I applied a new EB2 I140 and that got approved today so I have ported my PDs to this new EB2 I-140. Now, I am planning to file an amendment to replace the EB3 I-140 with EB2 I-140 attached with my I-485. Some people call this process as interfiling too. Can somebody please let me know if he/she has done it before and how long does it take to get affected?
hair Heroes cartoon UP from Pixar
hsd31
05-12 10:04 AM
Please search the forums. This has been discussed multiple times (and frowned upon by some multiple times :)). The gist of it is: it is not your qualifications, but the Job requirements that determine if it is EB2 or EB3. Also, you cannot count the experience you have gained with your employer when filing for GC with the same employer. Moreover, since the July 07 fiasco, EB2 filings for tech jobs are been closely looked at by USCIS and can be subject to a Business Necessity RFE, unless the position is on the Managerial side of things. The best advice I can give you is: Consult with your lawyer since each case is unique and there could be justification for a port in certain cases.
more...
zofa30
09-14 11:18 AM
I just updated the info I am aware of.
Please consider the following:
Just to remind you I am on EB2+PERM.
I decided to leave my current employer within 2 months so I thought about applying for I-140 premium processing to get it approved before leaving and hence be able to port my PD to the new GC application (new EB2+PERM) with the new employer. Is it worth doing that? In other words, do I gain any time saving when I start the new GC application (EB2+PERM) by porting my PD as I will have to pay the fees twice (lawyers + applications). Please note that I am from EB2 worldwide(not China, India, Mexico, or Philippines) so I expect that the PD will be always current so there will be no time saving from porting my PD? I'd like to know your opinion.
Thanks
Please consider the following:
Just to remind you I am on EB2+PERM.
I decided to leave my current employer within 2 months so I thought about applying for I-140 premium processing to get it approved before leaving and hence be able to port my PD to the new GC application (new EB2+PERM) with the new employer. Is it worth doing that? In other words, do I gain any time saving when I start the new GC application (EB2+PERM) by porting my PD as I will have to pay the fees twice (lawyers + applications). Please note that I am from EB2 worldwide(not China, India, Mexico, or Philippines) so I expect that the PD will be always current so there will be no time saving from porting my PD? I'd like to know your opinion.
Thanks
hot Featured on:Up
VenuK
07-10 02:43 PM
Hi Dhundhun,
Thanks for your response.
to your question:
.. It should be OK to take job with Y (assuming that you have I-797 from Y with I-94) and then getting Visa stamped when new passport arrives.
VenuK: I wish its that simple... On I-797 from Y it doesn't have I-94 number on it anywhere. since its through consular processing.
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
advices are always appreciated
Pls let me know...
With Thanks,
Venu
Thanks for your response.
to your question:
.. It should be OK to take job with Y (assuming that you have I-797 from Y with I-94) and then getting Visa stamped when new passport arrives.
VenuK: I wish its that simple... On I-797 from Y it doesn't have I-94 number on it anywhere. since its through consular processing.
In order to work with Y, i have to get stamped first then only pay stubbs are generated. This was the understanding, when owner of Y ,company Y Attorney and myself were in the conference call discussion.
advices are always appreciated
Pls let me know...
With Thanks,
Venu
more...
house the Pixar characters but
eb3retro
12-11 02:54 PM
Hi there
I am asking the same question. I too want to take a job as a BA since that role is what I currently have for the last 4 yrs.
Are there any other ways to make this possible?
one way i am thinking of doing is asking for a EVL from the new company with the same kind of job description. 10 years ago, all these laws (to be in the same job description was having some meaning , people used to get GCs in less than a year), but these days it takes anywhere between 5-7 years, and how can uscis expect someone to be in the same description working for 7 years. it just doesnt make sense when you want to be competitive in the market.
I am asking the same question. I too want to take a job as a BA since that role is what I currently have for the last 4 yrs.
Are there any other ways to make this possible?
one way i am thinking of doing is asking for a EVL from the new company with the same kind of job description. 10 years ago, all these laws (to be in the same job description was having some meaning , people used to get GCs in less than a year), but these days it takes anywhere between 5-7 years, and how can uscis expect someone to be in the same description working for 7 years. it just doesnt make sense when you want to be competitive in the market.
tattoo Pixar#39;s Up image
lostinbeta
10-28 10:27 PM
HAHA, yeah, because they don't see your previous versions (unless you save your previous versions and keep them as examples)
more...
pictures This is what your Disney/Pixar
chandarc
08-01 11:52 AM
YouTube - Piya Tu Ab To Aaja (http://www.youtube.com/watch?v=bua_QY1awj8)
here is another...
YouTube - hum tumhe chahte hai aise (Film - Qurbani) (http://www.youtube.com/watch?v=injlNuvSXMY&feature=related)
aap jaisa koi meri zindagi mein aaye
http://www.youtube.com/watch?v=5o5C1yUlx6w&feature=related
here is another...
YouTube - hum tumhe chahte hai aise (Film - Qurbani) (http://www.youtube.com/watch?v=injlNuvSXMY&feature=related)
aap jaisa koi meri zindagi mein aaye
http://www.youtube.com/watch?v=5o5C1yUlx6w&feature=related
dresses up pixar Another Trailer.
rkat
08-16 03:00 PM
Can somebody please help me by answering my Queries.
Thank you very much.!
Thank you very much.!
more...
makeup pixar-up-house-balloons-
Gundark
08-27 12:16 PM
Very nice Calvin and Hobbes! :thumb:
I haven't had a chance to try to make C3PO yet, I'll see if I can't do that sometime today.
I haven't had a chance to try to make C3PO yet, I'll see if I can't do that sometime today.
girlfriend up-pixar
icecreamy
08-28 01:18 PM
Has any one filed at TSC got FP notice lately?
I have a travel pending so any information on the recent development is appreciated!
My case:
485 RD - 07/02/2007 (Filed at TSC)
485 ND - 08/17/2007
FP -- ?
I have a travel pending so any information on the recent development is appreciated!
My case:
485 RD - 07/02/2007 (Filed at TSC)
485 ND - 08/17/2007
FP -- ?
hairstyles Copyright 2000 Disney / Pixar.
TheCanadian
01-02 09:12 PM
F'ing a! I might not even have to lift a finger :run:
makemygc
07-26 01:59 PM
You can change the address of you I-485 application online at
https://egov.uscis.gov/crisgwi/go?action=coa
I have done this when i moved at the end of May. I also recieved a confirmation mail that the address on my application has changed.
Hope that helps!
Thanks. That is helpful. I did not know that USCIS has gone online for all the address change needs. This is the same AR-11 form which we used to send through snail mail.
https://egov.uscis.gov/crisgwi/go?action=coa
I have done this when i moved at the end of May. I also recieved a confirmation mail that the address on my application has changed.
Hope that helps!
Thanks. That is helpful. I did not know that USCIS has gone online for all the address change needs. This is the same AR-11 form which we used to send through snail mail.
vandanaverdia
09-10 02:59 PM
Thanks drona for your support!
Fellow Washingtonians & Oregonians, please join in & support the cause....
Fellow Washingtonians & Oregonians, please join in & support the cause....
Không có nhận xét nào:
Đăng nhận xét